How to generate Infiniti keys with Autel IM608 Pro and Xhorse Key Tool : Automotive solutions > 자유게시판

Question:

I want to create a universal key for Infiniti Q70 or M37, which is a very expensive special smart key. What tool do you recommend?

obdexpress.co.uk engineer suggestion:

Both can perform the required function.

1. Generate with Autel IM608 Pro using Autel Nissan Universal Smart Key

Please connect Autel IM608 Pro and XP400 Pro correctly

Tap Universal Key in main menu

Agree to disclaimer

Select Universal Key Generation>> Asia>> Infiniti>> Type by Model>> M37/M56>> 2011

Click on the item - Infiniti M37/M56 2010–2018 to continue

The key is identified by VVDI Key Tool Max, transponder 46, PCF7945A_PCF7953A, unlocked.

Insert the key into the XP400 Pro coil and start to generate the universal key

Wait for a while, the universal key generation is completed

Then insert the key into Key Tool Max Pro to read the transponder again, which is PCF7952A and unlocked.

2. Generate with VVDI Key Tool Max Pro using Xhorse Universal Smart Proximity Key

Put the Xhorse universal key into the coil of Key Tool Max

Tap Vehicle Remotes>> Infinity>> M37>> M37 (2010–2013) KeylessGo ID46 433M>> Generate Remote

The key will flash red, which means the remote has been successfully generated.

Both universal key remotes have been successfully generated

3. Program Keys

After generation, you can add new keys using a professional key programmer.

Here we take Xtool AutoProPad as an example.

Use it to read the PIN code and unlock the steering lock.

Note: Make sure to turn on emergency lights to give your car a little power so you can start.

Connect key programmer to vehicle

Tap Fix >> US Nissan >> Accept disclaimer

Read BCM code and unlock steering lock (4 pin codes).

Read BCM code

Unlock steering lock after successful reading

Pay attention to the following notes:

PIN code can be calculated from BCM code. Click OK to continue

Turn off ignition

Confirm to bypass PIN code

Program key

Choose from Type >> Smart key system >> 4 PIN code >> Type 5 (Push button W/O slot)

Remove all smart keys from vehicle and press start button

Make sure to perform steering unlock function before programming key

Follow the on-screen instructions to program key

Step 1: Press start/stop button with key logo in the center of the button.

Step 2: If vehicle chimes twice and key ignition switch accepted. The immobilizer indicator will also flash five times. If the vehicle chimes more than six times and the ignition remains off, the key was not accepted and you will need to try again with the same different key.

Step 3: If the key was accepted, press and release the Start/Stop button and turn the ignition off.

Step 4: To program additional keys, repeat the same steps above

Step 5: Once all smart keys are programmed, press and release the Start/Stop button with the logo of the first key that was successfully deployed (this will exit the learning mode).

Step 6: Open and close the driver's door and the indicator light on the key will flash five times.

Step 7: Press Unlock on the programmed remote (this will activate the proximity and remote functions).

Step 8: Press the brake pedal and start the engine with each smart key. Store any untested smart keys 10 feet away from the vehicle.

Finished!

Both Autel MaxiIM IM608 Pro and Xhorse Key Tool Max Pro can generate universal keys for Infiniti M37/M56 2010-. Whichever you can get the benefit of betting on is the best for you.

Look into the cost of both, look into the time it takes to do both, and then decide on the most effective method on the market. Another locksmith in another country or region may cost quite differently than you. So what is good for you may not be so for them and vice versa.

www.obdexpress.co.uk