What Can A Weekly Ghost Immobiliser Problems Project Can Change Your Life > 자유게시판

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft by using the Ghost Immobiliser. This system is discreet & does not require any additional key fobs to operate.

The device utilizes buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique pin code sequence that can be up to 20 presses long. This will then allow the startup of your vehicle.

Simple PIN code Change Process

Many owners are upgrading their security because of the rise in vehicle theft. There are many kinds of security products that are available for sale, from tracking systems to alarms and immobilisers. However there are a few that are equally effective in protecting your car. A tracking system can help you locate your vehicle if it's stolen however it cannot stop the crime. Immobilisers, on the contrary, does exactly what it says on the tin: it shuts down the engine of your vehicle so that it is unable to be started. The autowatch ghost installers nottingham Ghost is one of the most advanced options available, making it virtually impossible for thieves steal your vehicle.

By using the buttons that are already present in your car The ghost device is able to create an exclusive sequence that has to be entered before the engine can start. This can be done by using the heater, window or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their car without the need to use the button sequence. This feature is particularly beneficial if you have to hand your car over to a valet service or parking, as the immobiliser will remain active and not deactivated.

The Ghost is an innovative and unique device that operates with your vehicle's buttons rather than as a standalone unit. It is not only an effective deterrent for vehicle theft and vandalism, but it can be used to secure any future vehicles you may own. This makes it a far more cost-effective option than a traditional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is a sophisticated security system that protects your pride & joy from key hacking and cloning. It also prevents ECU swapping. It's a weatherproof and small device that communicates directly with your vehicle's ECU via the CAN data bus, which disables the engine. It can be installed in the vehicle without the need for extra wiring and has been extensively tested to make sure it works with all vehicles. It also is resistant to jamming devices, which is an approach used frequently by thieves to bypass the immobilisers in place.

The benefit of using CAN data is that it runs silently compared to traditional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing techniques, nor can it be detected by traditional diagnostic tools. The autowatch ghost immobiliser installation local ghost installer doesn't use LED indicators, but instead uses buttons on your vehicle, like the steering wheel, centre console or doors, to create an unique sequence of disarming. You can even create a sequence that is as long as 20 presses for added security. The iPhone app allows only one, authenticated connection with the pairing code unique to the Ghost Immobiliser Installation Near Me and the communication between the two devices is encrypted.

The Ghost also stops car thieves from adding the key to a new car or replacing the ECU to bypass the immobiliser to start the engine. The engine can only be started only if a valid PIN has been entered. It is also possible to put it in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) so that you can hand your car over to a valet service or to be serviced without needing to enter a PIN code.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that connects to your vehicle's existing wiring and connects to your engine control unit (ECU). The device is able to intercept signals and prevent your car from starting normally until you enter a customized code. The system can be turned on or off by using your smartphone app without the need for extra wires.

Standard factory immobilisers on automobiles function through an electronic transponder in the key that transmits a signal to the ECU. If the correct code is sent the car will start however, if the transponder is swapped with one from another vehicle the immobiliser won't recognize it. This allows the vehicle be stolen and started. A South African company that is at the forefront of safety systems technology has developed the Ghost immobiliser. It shields you from key cloning or hacking, and even key theft. The only way a thief could take your vehicle is physically towing it away, and even then they would not be able to drive it.

Ghost makes use of buttons in your vehicle, including the indicator stalk, steering wheel, and doors, to generate an individual PIN code that must be entered to use your vehicle. This is done without any additional hardware, like a keyfob. It can take up to 20 presses. It is also unrecognizable by diagnostic equipment and does transmit radio frequency signals, which means thieves cannot use sophisticated RF scanners or code-grabbing techniques to determine if an installation has been made.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks Ghost is concealed within the vehicle so it can't be disabled or removed by thieves. It's even more difficult to get rid of than a car alarm that requires disarming using an action sequence. This makes it a fantastic complement to a GPS tracking device that can be used to locate your vehicle after it's been stolen.

Override of emergency PIN code

You do not have to go far on social media to see stories or even videos of vehicles that were stolen by thieves using the latest technology tools available to them. This includes key-cloning and hacking tools that allow the vehicle to start without the original key fobs.

Our Ghost immobiliser is specifically designed to prevent this and offer an additional layer of security to prevent your vehicle from being targeted by thieves. It works by creating an unique pin code push sequence from your buttons on the steering wheel, door panel, and the center console. The unique pin code must be entered in conjunction with your original key fob in order to prevent the vehicle from getting started. The unique override pin can be located on a black card which you will receive following your installation. It is simple to remember because there aren't any LED indicators.

The device is hidden within the vehicle's wires and does not emit radio signals, so it can't be identified by modern thieves using diagnostic software that is able to identify the security system you have installed. This makes it a great alternative to an electronic device for tracking.

Contrary to most security systems, which have a relay inside the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependent). This allows them to shut down a vehicle completely by sending an electronic block to the ECU and engine.

These systems can also be linked to a separate alarm immobiliser or tracker. This must be specified prior to the installation. They are also fully service/valet mode-compatible and a good alternative to a tracker if you are you have your car checked for repair at the dealership.

Service/Valet mode

In recent years there has been a rise in the number of vehicles being stolen with the owners' keys. With easy access to key cloning equipment and door lock pick sets it is now easier than ever for thieves to steal your joy and pride. We have created the Autowatch Ghost Immobiliser to combat this. It blocks your vehicle from being driven even if your keys have been copied.

It connects directly to your vehicle's ECU (Engine Control Unit) through the CAN data circuit. It's completely quiet since it doesn't utilize radio frequencies or a key fob. It cannot be detected using diagnostics or any other hacking device. It also prevents the addition of an additional key or replacing the ECU to get around the system, since only the correct PIN code will allow the engine to start.

The device is hidden inside your car by using buttons on the steering wheel, centre console & door panels. Before you can begin your vehicle, you must enter a unique and changeable PIN code that can be as long as 20 numbers.

This is the very first aftermarket CAN-bus immobiliser that is being designed. It can prevent your vehicle from being started or driven in the event that you do not enter a PIN number first. If the device is in armed and you attempt to drive away, it will display a warning on your dash, which will flash continuously for about 300m, if you enter your PIN code during this time, it will disarm the anti-hijack and your car will continue to drive in the normal way. If you do not enter your PIN in this moment, the indicator will continue to flash and require a new PIN every time you attempt to start your car.