Why Is This Ghost Immobiliser Problems So Beneficial? In COVID-19? > 자유게시판

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will safeguard your valuable property from theft. It's discreet and doesn't require additional key fobs.

The device uses existing buttons in your vehicle (steering wheel, door panels & centre console) to create a unique, changeable pin code sequence up to 20 presses. This allows your vehicle to start.

Simple PIN code Change Process

Many homeowners are upgrading their security because of the rising number of vehicle thefts. There are many different types of aftermarket security devices including tracking systems, alarms and immobilisers. However, not all of these are equally effective in protecting your car. A tracking device can help you locate your vehicle in the event of it being stolen however it cannot stop the crime. Immobilisers, in contrast perform exactly as they claim on the label - they shut off your car's engine so that it can't be started. The Autowatch Ghost is one of the most advanced options available, making it virtually impossible for thieves steal your car.

Using the existing buttons in your car, the ghost device creates an unique sequence that must be entered before the engine will start. This can be done using the heater, window or indicator stalk buttons. Additionally it is possible to use an app on mobile that can act as an emergency PIN code override and allows the driver to operate the car without the button sequence. This is especially beneficial if you have to surrender your car for valet parking or servicing since the immobiliser will still be activated, but not disabled.

The Ghost is an unique and innovative device that works by using the buttons of your vehicle instead of as a separate unit. This means it's not just a highly effective protection against theft of your vehicle, but it can also be transferred onto any other vehicles you may have, making it more of an investment than the traditional lock on your steering wheel.

Small device that is weatherproof

The Autowatch ghost immobiliser is a sophisticated security system that protects your vehicle from key cloning, hacking and ECU swapping. It is a weatherproof tiny device that connects directly to your vehicle's ECU via the CAN data bus to disable the engine. It can be placed in the vehicle without the need for additional wiring and has been thoroughly tested to ensure it is compatible with all vehicles. It also is resistant to jamming devices that are the most common method used by thieves to bypass existing immobilisers.

The advantage of CAN data over conventional systems is that they operate in a silent manner. It is not able to be detected by sophisticated RF scanning and code-grabbing technologies as well as detected by traditional diagnostic tools. The Autowatch ghost immobiliser fitter does not produce LED indications and uses the buttons inside your vehicle, such as the steering wheel, centre console or door panels to create a unique, changeable disarm sequence. The sequence can be extended 20 presses for additional security. The iPhone app only allows one connection, with the ghost immobiliser review's unique pairing code. the Ghost. All communication between the two devices is encrypted.

The Ghost prevents car thieves adding a new ignition key or replacing the ECU in order to bypass the immobiliser. The engine will only start if a valid PIN code has been entered. It is able to be operated temporarily in Valet/Service mode (with parameters set such as a 30mph speed limit) and, therefore, you can offer your vehicle to a valet or service without needing to enter the code.

Every vehicle is tested

The Autowatch ghost 2 immobiliser cost is a world-first aftermarket immobiliser for CANbus. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device intercepts electronic signals that block the system of your vehicle from running its normal start-up routine until you input a custom passcode. The system can be activated and deactivated using your own smartphone application without the need for additional wires.

Standard factory immobilisers on vehicles function by using a transponder inside the key, which sends a signal to the ECU. If the correct code is sent the car will start, but if a transponder is replaced with one from another vehicle the immobiliser will not recognise it. This allows the vehicle be stolen and started. A South African company that is at the forefront of safety systems technology has developed the Ghost immobiliser. It protects you from hacking or key cloning, and even key theft. Only by physically towing your car away from thieves could they steal it and not be able to drive it.

Ghost uses the buttons in your vehicle, including the indicator stalk, steering wheel and door panels to create a unique PIN code that is changeable that must be entered before you can use your car. This is done without additional hardware, like keys fobs. It can take up to 20 presses. It is also unrecognizable to diagnostics equipment and doesn't transmit radio frequency signals, which means thieves cannot utilize sophisticated RF scanning or code-grabbing technology to discover that the security system has been installed.

Ghost is more difficult to get rid of than car alarms that require disarming by pressing the buttons. This makes it a perfect alternative to a GPS tracker which helps locate your car after it has been taken.

Emergency PIN code override

You don't have to look long on social media sites to find stories or videos of vehicles that were stolen using the most advanced technology tools. Key-cloning devices, for instance, and hacking tools that allow thieves to start the vehicle without your original keys.

The Ghost immobiliser has been designed to combat this and provide you with an additional layer of security in order to prevent your vehicle from being targeted by thieves. It is created by creating a unique pin code sequence that is triggered by the buttons you have on the steering wheel, door panel, and the centre console. This unique PIN is entered along with the original key fob to prevent the engine from getting started. The unique override pin can be found on the black card you will receive following your installation. It is simple to remember since there aren't any LEDs.

The device is hidden in the wiring of your vehicle and doesn't emit radio signals. This means it can't be detected by diagnostic software which can identify the type of security system you have installed. This makes it an excellent alternative to a tracker.

Unlike other security systems, which rely on a relay in the engine bays, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to disable the vehicle completely by sending a digital block of commands for both the ECU and the engine.

They can also be connected to a separate alarm immobiliser or tracker. This must be specified prior to the installation. They are also compatible with valet and service modes, and are an excellent alternative to a tracking device when you take your car into the dealer for repairs to an electrical problem.

Service/Valet mode

In recent times there has been an increase in vehicles that are stolen without owners' keys. It's now easier than ever to steal your pride & joy thanks to the availability of key cloning devices and door lock picks. We've developed the Autowatch ghost installation near me Immobiliser to combat this. It blocks your vehicle from being driven even if you keys have been copied.

It connects directly to your cars ECU (Engine Control Unit) via the CAN data circuit. It's completely silent since it doesn't use radio frequencies or a key fob. It can't be detected by diagnostics or any other hacking device. It also stops you from introducing an ECU or key to bypass the system since only the PIN code allows the engine to start.

The device is hidden in your car and is accessed by existing buttons on your steering wheel, the centre console, and door panels. Before you can begin your car, you must enter a unique and changeable PIN code up to 20 numbers.

This is the first aftermarket CAN bus immobiliser to be developed that can prevent your car from being started or driven away without a PIN code being entered before. If you are driving away with the device in motion the indicator will flash on your dashboard which will flash continuously for about 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to function as normal. If you don't enter your PIN code at this time the indication will continue to flash and require a new PIN code for every attempt to start your car.